What we look for first
When we visit a windy garden in Stourport-on-Severn, we start at the base of the posts. Rot at ground level, a loose footing or a post that was set in soil with no concrete is the most common find. Then we look at the panels for cracks near the fixings, and at the overall height and spacing. The wind does not usually break a fence in one go. It works at it until a weak point gives way.
We also ask which direction the worst gusts come from and what the garden faces. A fence looking over open land is a very different job to one between two houses. Knowing this helps us decide where to use heavier posts or a gapped design, and where a standard build is perfectly fine.
Our approach to posts and concrete
For exposed ground we set posts well down in concrete, with a collar wide enough to hold the post firmly. The depth rises with the height of the panel, because more height means more leverage on the post. We finish the concrete sloping away so water drains off, and we use treated timber or a concrete post where the ground is very wet.
Gravel boards go along the bottom so the panels stay out of damp soil, and panels are fixed securely so they cannot be pulled out in a gust. If a fence only needs a few posts replaced, we will say so rather than suggest a full replacement. Good repair work on the weak points often gives years of extra life.
Panel choice and compromise
Not every fence has to be solid. Many of our customers choose a slatted or gapped panel on the windy side, which lets the wind through and puts far less strain on the posts. It still gives plenty of privacy when the slats are close, and it makes the garden calmer to sit in because the air is slowed rather than thrown over the top.
If you want a solid fence, we suggest keeping the height sensible and making the posts count. A mixed approach also works, such as solid panels near the patio and filtering ones along the exposed boundary. We will talk through the choices with you, point out the trade-offs honestly, and let you decide what suits your garden.
Quick tips
- Check the base of leaning posts for rot or loose footings, since the problem is often below ground rather than in the panels.
- Use deeper posts set in concrete for taller panels, and slope the top of the concrete so water runs away from the timber.
- Choose slatted or gapped panels on the side facing the strongest wind to reduce the load on every post.
- Repair a few weak posts rather than replacing everything, where the panels are otherwise sound.
If your fence in Stourport-on-Severn is struggling in the wind, call us or send a photo with the fence location. We know the DY13 area well and also work in Kidderminster and Bewdley. There is no pressure, just a straight conversation.
Frequently asked questions
What do you check first on a leaning fence?
We start at the base of the posts, looking for rot at ground level, loose footings or posts set in soil with no concrete. Then we check the panels for cracks near the fixings. Sometimes only a few posts need replacing, and we will say so.
Do I need a fully solid fence on the windy side in Stourport-on-Severn?
Not necessarily. Many customers choose a slatted or gapped panel on the windy side, which lets wind through and puts far less strain on the posts. Close slats still give plenty of privacy. A mixed approach, solid near the patio, also works.
Garden fencing installers in Stourport-on-Severn · All advice guides